西门子6GK5216-4BS00-2AC2可管理层交换机

SIDOOR ATD400T interior railway door drive

The SIDOOR ATD400T interior railway door drive is an "intelligent" door drive which enables interior and gangway doors to be opened and closed at adjustable speeds and accelerations.

Relay module design

For dynamic door weights up to 180 kg

Automatic door weight detection

Operating temperature -20 to +70 °C 1)

Flexible motor management (two different motor types), automatic detection

Opening width 0.25 to 4 m

Door can be operated with and without closing springs (60 to 80 N)

With two identical door leaves, can be used up to a train inclination of 0 to 10%

Forces and energies are limited in accordance with EN 14752

EMC according to EN 50121-3-2

Fulfills HL3 according to fire protection standard EN 45545-2 (Railway applications – Fire protection on rail vehicles)

Vandal-proof

1) Note:

Maximum output current at 24 V DC:

0.4 A at ≤ 55 °C ambient temperature during operation

0.1 A from 55 °C to 70 °C ambient temperature during operation, with restrictions at operating temperatures > 55 °C

Maximum ambient temperature during operation:

55 °C

70 °C with restrictions at operating temperatures > 55 °C

Restrictions at operating temperatures > 55 °C:

Use the 24 V output voltage only for operating the control inputs (max. 0.1 A)

Use a sufficiently large (at least 350 x 350 mm), unpainted metal mounting plate

The maximum drive parameters are restricted to the default values

If temperature class T3 according to EN 50155 is used, the maximum air temperature of 85 °C must not be exceeded near the printed-circuit board

1-button operation for the entire commissioning process

Optimum and stable drive characteristics

Reduced service requirements and costs

SIDOOR User Software (part of the Software Kit, not included in the scope of delivery, see "Additional units") enables user-friendly operation and detailed diagnostics.

Integrated terminal module enables simple setup and diagnostics via an event and statistics memory.

Small footprint thanks to compact design

Automated functions for enhanced safety

The SIDOOR ATD400T interior railway door drive is an "intelligent" door drive which enables gangway doors to be opened and closed at adjustable speeds and accelerations.

The maintenance-free drive unit consists of a speed-controlled DC motor with non-self-locking gearing.

SIDOOR MDG180 geared motor DIN EN 45545-2
(24 V DC/1.8 A; motor for max. overall door leaf weight 180 kg, degree of protection IP40, fulfills fire protection standard DIN EN 45545-2 (Railway applications – Fire protection on railway vehicles)

SIDOOR M3 geared motor
(24 V DC/1.8 A; motor for max. overall door leaf weight 180 kg, degree of protection IP40)

Must be ordered separately, see "Geared motors".

Operation of the door drive does not require limit switches. The door width and the "OPEN" and "CLOSED" positions are determined automatically.

The current operating states are shown on a 7-segment display directly on the SIDOOR ATD400T RELAY controller. They can also be displayed externally using the Software Kit or Service Tool, see "Additional units".

Forces are transferred via a toothed belt, which passes over a deflector unit and can be fitted with two door clutch holders. The accessories are not included in the scope of supply, see "Accessories".

This enables it to drive both one-sided and centrally opening doors.

The SIDOOR ATD400T RELAY drive system for interior railway doors consists of a number of components:

During initial commissioning, please note the following:

Mechanical installation and configuration see operating instructions "SIDOOR ATD400T controller for use with interior railway doors", ./WW/view/de/82127712

Electrical configuration and commissioning:

Push the door into the "CLOSED" position.

Open the enclosure cover

Plug in the motor plug

Connect DC power supply via line filter (SIDOOR EPM24)

Press and hold the learn run button

The learn run starts automatically and the learn run button can be released.

On completion of the learn run, the door is in the "CLOSED" position and the terminal module indicates "u".

The door can now be moved via the "OPEN" and "CLOSE" buttons (on the terminal module) with the default profile.